| MOBOTIX mx10-13-148-92 Camera Status |
| ▽ System | ||
|---|---|---|
| Model | S15D-Sec | |
| Factory IP Address | 10.13.148.92 | |
| Hardware | T2r4.3b, 806 MHz, 512 MByte RAM | |
| ExtIO | no ExtIO connected | |
| Image Sensor | b/w, L12 (ceiling-mounted) | |
| Software | MX-V4.1.9.29 (2013-09-09) | |
| Date and Time | 2024-10-16 16:22:29 CEST | |
| Current Uptime | 2 days 13:07:18 | |
| ▽ Networking | ||
| Camera Name | mx10-13-148-92 | |
| BOOTP/DHCP | off | |
| Zeroconf | on | |
| IP Address | 192.168.0.80 | |
| Network Mask | 255.255.0.0 | |
| Broadcast | 192.168.255.255 | |
| Link Speed and Duplex | 100Mbps / Full Duplex | |
| Statistics | Dropped: 16.5% | Collisions: 0% |
| ▽ Routing | ||
| Default Route | Gateway: 192.168.0.254 Connection: Ethernet interface | |
| ▽ Audio | ||
| Microphone | Medium sensitivity | (Microphone of Cam1) |
| Speaker | 21 | |
| ▽ File Server / Flash Device | ||
| File System | MxFFS | |
| Flash Wear | 58% | |
| Status | - Locked flashcard missing - Device SD Flash Card could not be brought up for I/O - Maybe SD Flash Card is missing, incorrectly installed, defective, ... - Expansion device SD Flash Card failed to initialize for event recording - Storage cannot be written (bad storage) | |
| Transfer Buffer Usage | 3% (Ø: 5%, max: 17%) | |
| Lost Event Images | 5635 | |
| Sequences | 0 (0 files) | |
| Current Usage | 0.0 MBytes (nan%) | |
| Max. Size | 0.0 MBytes | |
| ▽ Event and Action Setup | ||
| Arming | Enabled | |
| Events | AS UC | |
| Actions | REC FR | |
| ▽ Recording Setup | ||
| Arm Recording | Enabled | |
| Recording Mode | Continuous Recording (with audio) | |
| Recording Frame Rate | 1 fps | |
| Event Frame Rate | Max fps | |
| Start Recording Events | all | |
| Stretch Recording Events | none | |
| Stop Recording Events | none | |
| Rec. Time After Event | 10 s | |
| Rec. Time After Stop Event | 10 s | |
| Rec. Dead Time | 5 s | |
| ▽ Sensors | ||
| Internal PIR Level | 0% | |
| Illumination | 73.3 lux | |
| Signal Input | open (high) | |
| Buttons | none | |
| Camera Temperature | 23°C (73°F) | |
| ExtIO Temperature | 0°C (32°F) | |
| ▽ Image Setup | ||
| Video Codec | MxPEG (16384 KBytes) | |
| Image Quality | Normal | |
| Image Properties | 2048x1536, 90% JPEG quality, Surround | |
| Sharpness | 7 | |
| Dark Noise Suppress | Low | |
| Auto Contrast | Standard | |
| Brightness | 0 | |
| Backlight | 2 | |
| Exposure Mode | Full Image Area | |
| Exposure Field Weighting | 100% | |
| White Balance Weighting | Total | |
| Average Brightness | 40% | |
| White Balance Profile | Automatic WB | |
| Color Saturation | 0 | |
| Blue Balance | 0 | |
| Red Balance | 0 | |
| Hardware Gain (G R B) | 2816 2816 2816 | |
| Current Exposure Time [ms] | 5 (0.16-160) | |
| Current Frame Rate | 1 fps (maximum 10 fps) | |
| Line Frequency | 50 Hz | |
| ▽ Web and Network Access | ||
| Listening Ports | 80/tcp | thttpd |
| 111/udp | portmap | |
| 111/tcp | portmap | |
| 123/udp | ntpd | |
| 443/tcp | thttpd | |
| 5353/udp | mdnsd | |
| 34422/udp | mdnsd | |
| Your IP Address | 3.145.62.167 | |
| Your Browser | Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com) | |